Trang chủ   Giới thiệu   Tin tức   Dịch vụ   Giải pháp   Tuyển dụng   Liên hệ  
Sản phẩm
 
Dịch vụ
 
  Tư vấn, thiết kế hệ thống chữa cháy, bơm nước, bơm dầu
  Bảo trì hệ thống máy bơm cn, van chữa cháy, máy phát điện
  Hướng dẫn mua, sử dụng máy bơm CN, bơm cứu hỏa
  Hướng dẫn lựa chọn sản phẩm
  TCVN Hệ thống chữa cháy sprinkler tự động
 
Thống kê
 
Khách trực tuyến: 69
Lượt truy cập: 7522
 
Partner

Sản phẩm
Surge Anticipating valve, Pressure Relief Valve,
Surge Anticipating valve, Pressure Relief Valve,
 
 
» Liên hệ về sản phẩm này
MÔ TẢ

 

The surge anticipating valve is adjusted to eliminate hazardous pressure surges typical of water hammer conditions. A water hammer is caused by an abrupt shutoff of a pump or rapid closure of a main valve, causing a fast propagation of low pressure front, followed by an extremely high pressure back-wave. A series of pressure waves, each one composed of alternating low & high pressure, is created within a few minutes.

 

 

Application of surge anticipating valve:
Use a surge anticipating valve to protect water lines against water hammer damages. Uphill supply lines of considerable length & large diameter pipes are more susceptible to water hammer damages.
For more info or hazard analysis of particular network consult Iva Vietnam Engineers.
 
Installation
The Surge Anticipating hydraulic Valve is activated by line pressure & controlled by two pilot valves. Both pilots include spring-loaded membranes. The low pressure pilot (the left one in the drawings) is preset to open the surge anticipating valve gradually when the line pressure drops about 10m below normal. The high pressure pilot (on the right) is preset to open the surge valve when the line pressure rises about 10m above normal. The surge valve is normally closed. Only when the line pressure is drops below or rises above the preset limits, the surge valve is piloted to open. A water hammer event starts with a considerable pressure drop, which cause the surge valve to open. Then, as the water wave rolling backward, the valve remains open & let the pressure out to diminish its impact.
 

 

 
Sản phẩm cùng loại
 
  Anti-Burst Control Hydraulic Valve
 

Anti-Burst control valves are piloted hydraulic valves activated by line pressure. Normally the valve is open. Only in case of flow rate higher than a preset

 
Trang (1/1): 1 ... « Trang đầu  |  Trang cuối » 
 
Hỗ trợ KH
Hotline: +84.989.886.889
     Skype Me™!
Bán hàng trực tuyến (Hà)
     Skype Me™!
Bán hàng trực tuyến (Xuân)
     Skype Me™!
Bán hàng trực tuyến (IVA)
     Skype Me™!
Bán hàng trực tuyến (Tu)
     Skype Me™!
Bán hàng trực tuyến (Trung)
     Skype Me™!
Chăm sóc khách hàng (After Sales)
 
 
Tin tức
 
Tiện ích
 
   Giá vàng
   Thời tiết
   Tỷ giá ngoại tệ
   Chứng khoán
 
Partner

Trang chủ | Liên hệ | Đầu trang
 

CÔNG TY TNHH TẬP ĐOÀN QUỐC TẾ VŨ ANH
IVA - VIETNAM CO.,LTD.

Trụ sở: Chua Nhi, Thanh Liet, Thanh Tri, Hanoi, Vietnam.
VP Đại diện: Số 45 Đường Ngọc Hồi , Phường Hoàng Liệt, Quận Hoàng Mai, Hà Nội, Vietnam
Điện thoại: 04-6.2883.882; 6288.3289    Fax: 04-6288.3286
Website: www.iva-vietnam.com . Copyright © 2005-2010 iva-vietnam. All Rights Reserved – Contact us
*Iva Vietnam, Vietnam pump* Công ty TNHH Tập đoàn Quốc tế Vũ Anh giữ bản quyền nội dung trên website này.